RAM Short Suction Round Plate Bundle (RAM-B-166-A-202U)

Included:

• 1 × RAM Suction Cup Base w 1" Ball (RAM-B-224-1U)
• 1 × RAM Short Double Socket Clamp Arm B Size (RAM-B-201U-A)
• 1 × RAM Round Base with 1" B Ball (RAM-B-202U)

A compact suction-cup mounting assembly for a compatible holder or cradle with a four-hole AMPS connection. The short arm keeps the holder close to the mounting surface while the two B-size ball joints let you adjust its angle.

Choose a compatible device holder or cradle separately. The holder and device are not included.

Specifications

• Overall Height: 5.44" (138.2 mm).
• Ball size: B size, 1 inch (25.4 mm).
• Suction cup: 3.3 inches (83.8 mm) in diameter; Twist-Lock operation.
• Short arm: 2.42 inches (61.5 mm) overall; 1.75 inches (44.5 mm) socket-to-socket.
• Round plate: 2.5 inches (63.5 mm) diameter.
• Plate patterns: four-hole AMPS, 1.181 × 1.496 inches (30 × 38 mm), plus three holes on a 1.812-inch (46 mm) circle at 120 degrees.
• Materials: marine-grade aluminium arm and plate; aluminium and high-strength composite suction assembly.
• RAM-B-224-1U includes assembly hardware.
• RAM’s published B-size component ratings: up to 2 lb (0.91 kg) for standard use and 1 lb (0.45 kg) for heavy-duty use. Mounting surface, leverage, vibration and the full holder-and-device load must also be assessed.
• Packaging may vary; all listed components are genuine RAM.
• Warranty: RAM’s limited lifetime warranty is subject to its terms; suction-cup rubber is a wear item and is excluded. This component bundle does not extend that warranty to a device, vehicle or installation.

Help

Use the suction cup on a clean, smooth, non-porous surface such as glass. Check the mounting surface and suction seal regularly. The upper round plate is intended for a plate-backed holder; a cradle with its own B-size ball can connect directly to a B-size arm and may not need this plate.

Check the selected holder’s hole pattern, thread and required screw length before assembly.

Compatibility

The supplied output is a four-hole AMPS plate with a B-size ball. Use it with a flat-backed holder that accepts this pattern and suitable fasteners. A holder with an integrated 1-inch B-size ball can fit directly into the arm instead of the supplied upper plate. A C-size ball requires a matching C-size arm.