RAM C Size Double U-Bolt Mount w X-Grip for 9"-11" Tablets (RAM-HOL-UN9-235U)

Included:

• 1 x RAM X-Grip III 9"-11" Tablet Cradle (RAM-HOL-UN9U)
• 1 x RAM Round Base with 1.5" C Ball (RAM-202U)
• 1 x RAM Standard Clamp Arm C Size 1.5" (RAM-201U)
• 1 x RAM Double U-Bolt Base with 1.5" C Ball (RAM-235U)

A complete RAM X-Grip UN9 tablet mount with a fixed double U-bolt base, a standard-length C size arm and the matching round holder plate. The twin U-bolt base clamps to a compatible round rail.

The spring-loaded X-Grip has expanding arms and rear grip knobs for quick tablet release. The C size ball-and-socket joints allow you to adjust the viewing angle.
Tablet support requirements still apply: the optional supports limit tablet height to 10.25" (260.4mm). Keep a support beneath the tablet for portrait use beyond very light-duty or static conditions.

The UN9 holder has no built-in ball. The included holder-side RAM-202U plate supplies the C size interface. Tablet and case are not included.

Fits round rails from 1" to 1.25" (25.4–31.8mm) outside diameter. Check clearance and clamp placement before installation.

Cradle Dimensions

• Width Range: 6.25"–8.1" (158.8–205.7mm)
• Maximum Depth: 0.875" (22.2mm)
• Maximum Height with Optional Supports: 10.25" (260.4mm)

Measure the tablet with its case fitted and check grip, button and port clearance. Screen size alone does not establish fit. Check the device/case dimensions and support configuration before ordering.

Specifications

• Holder Hardware Included: Assembly hardware, 4 x #8-32 x 1/2" and 2 x #8-32 x 5/8" sheet-metal screws, supplied with the UN9 holder
• Ball/Socket Size: C Size, 1.5" (38.1mm), throughout
• Arm Socket-to-Socket Length: 4.66" (118.4mm)
• Materials: Marine-grade aluminium, high-strength composite and stainless steel
• Round Plate Diameter: 2.5" (63.5mm)
• Holder Connection: Included RAM-202U plate bolts to the holder’s 4-hole AMPS pattern, 1.181" x 1.496" (30 x 38mm)
• Rail Range: 1"–1.25" (25.4–31.8mm) outside diameter
• Base Hardware Included: 2 x 1/4"-20 U-bolts, 4 x 1/4"-20 Nyloc nuts and 4 rubber caps
• Weight Capacity: 4 lb (1.81kg) standard use; 3 lb (1.36kg) heavy-duty use. Check the weight of the actual tablet, case, accessories, holder and adapters, plus the holder configuration, arm reach and mounting surface. These figures are not a blanket off-road rating for every tablet that fits.

Packaging may vary; all listed components are genuine RAM. RAM components are covered by the manufacturer’s limited lifetime warranty terms.

Help

RAM recommends the optional support arms for larger tablets and rough conditions; fitted supports limit tablet height to 10.25" (260.4mm). Taller tablets can fit with at least one support omitted, provided width and depth remain within range. For portrait use beyond very light-duty or static conditions, RAM advises retaining a support beneath the tablet to prevent downward movement. Confirm the actual configuration for your device; a larger C size ball does not remove these holder-retention limits.

See RAM’s tablet fit guidance and the holder specifications. Check holder retention, arm knob and mounting base before use. Keep controls, airbags and visibility clear.