RAM Motorcycle Handlebar Clamp Base w M8 Bolts (RAM-B-367U)

10 reviews
Size Guide


  • 1 x RAM Motorcycle Handlebar Clamp Base w M8 Bolts (RAM-B-367U)

Do you have an M8 by 25, 30, or 35mm handlebar bolt? If so, the RAM-B-367U can replace that bolt with a standard RAM ball-mount to put just about anything there!

The RAM-B-367U is compatible with any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size. 

    • Material: Marine Grade Aluminum
    • Ball Size: B Size 1" Rubber Ball
    • Attachment Point: Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
    Note: The "U" in the part number reflects product packaged in poly bag. To determine if these bolts are compatible with your motorcycle measure the bolt for the diameter and add 30mm to the length. If it matches one of the 55, 60, or 65 mm length, then you can use the appropriate bolt supplied with the mount. If it does not match, you may be able to source the correct length of bolt locally or from your BMW dealer. Be sure to use the correct torque spec when attaching the mount.
    • Weight: 0.25 lbs.
    Purchase Includes:
    • (QTY. 1) 1" Rubber ball
    • (QTY. 1) M8 x 55 bolt (1.25 thread pitch)
    • (QTY. 1) M8 x 60 bolt (1.25 thread pitch)
    • (QTY. 1) M8 x 65 bolt (1.25 thread pitch)

    Customer Reviews
    4.9 Based on 10 Reviews
    Write a Review Ask a Question

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Filter Reviews:
      Mark T.
      Australia Australia
      Ram handlebar clamp mount.

      Ram mounts are always great from my experience. This part is no exception. Solved a problem mounting a GPS wonderfully for me.

      Callum M.
      Australia Australia
      RAM Motorcycle Handlebar Clamp Base w M8 Bolts

      Good. Easy to install. Does the job.

      Armando M.
      Australia Australia
      RAM Motorcycle Handlebar Clamp Base w M8 Bolts (RAM-B-367U)

      Essential item if you are going to use the phone mount on your handlebar. A clever yet simple idea. The different size bolts allow you to adapt it to your particular situation. More cleverness from this great product!

      John C.
      Australia Australia

      Fitted perfectly. I was able to remove the U clamps from my handlebars which made it less clutter and simplified.

      John S.
      Australia Australia
      RAM Handlebar Mount

      All good. Does exactly what I wanted it to do. As designed. Service and communication from the supplier was first rate. Will be dealing with this company again