RAM Motorcycle Handlebar Clamp Base w M8 Screws (RAM-B-367U)

Size Guide

or make 4 interest-free payments of $4.84 AUD fortnightly with Afterpay More info


  • 1 x RAM Motorcycle Handlebar Clamp Base w M8 Screws (RAM-B-367U)

Do you have an M8 by 25, 30, or 35mm handlebar bolt? If so, the RAM-B-367U can replace that bolt with a standard RAM ball-mount to put just about anything there!

The RAM-B-367U is compatible with any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size. 

    • Material: Marine Grade Aluminum
    • Ball Size: B Size 1" Rubber Ball
    • Attachment Point: Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
    Note: The "U" in the part number reflects product packaged in poly bag. To determine if these bolts are compatible with your motorcycle measure the bolt for the diameter and add 30mm to the length. If it matches one of the 55, 60, or 65 mm length, then you can use the appropriate bolt supplied with the mount. If it does not match, you may be able to source the correct length of bolt locally or from your BMW dealer. Be sure to use the correct torque spec when attaching the mount.
    • Weight: 0.25 lbs.
    Purchase Includes:
    • (QTY. 1) 1" Rubber ball
    • (QTY. 1) M8 x 55 bolt (1.25 thread pitch)
    • (QTY. 1) M8 x 60 bolt (1.25 thread pitch)
    • (QTY. 1) M8 x 65 bolt (1.25 thread pitch)

    Customer Reviews
    4.8 Based on 6 Reviews
    Write a Review Ask a Question
    • Reviews
    • Questions

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Filter Reviews:
      John S.
      Australia Australia
      RAM Handlebar Mount

      All good. Does exactly what I wanted it to do. As designed. Service and communication from the supplier was first rate. Will be dealing with this company again

      Craig S.
      Australia Australia
      ram 1"ball mount

      The ball mount was of high quality as usual but sat too high up on the handle bar so when clamped to small arm then onto i phone base it blocked instrument display. I purchased RAM V-Shape base 1" ball and could then angle clamp adapter downward so now i phone is below instrument display but still in line of sight. An easy solution and great addition to bike.

      Glenn S.
      Australia Australia
      RAM Motorcycle Handlebar Clamp Base w M8 Screws (RAM-B-367U)

      The mount was of good quality and fitted easily onto the handlebar mounts. A good kit.

      Antonio M.
      Australia Australia
      Nice purchase experience

      Very happy with purchase experience with Modest Mounts.

      Peter B.
      Australia Australia
      Very happy

      Purchased the handlebar ball for my XJR 1300 and couldn't be happier with it. Integrates very well onto the bike and even took the little chrome Allan bolt cap so becomes quite inconspicuous. Exactly what I was after. Prompt service from Modest Mounts made it all so much easier.